產品介紹
基底材料是用于SEM,AFM,X射線分析,電子探針顯微鏡等設備表征時的樣品提供各種類型的襯底。隨著各種制備手段的提高,基底材料的特性將很大程度上影響材料的生長過程?;撞牧系奶赜袑傩裕ㄈ绻?、電、磁等屬性)也會影響到樣品的表征。所以選擇正確的基底對樣品的制備過程與表征結果有重要的意義。
原裝進口 V1級(最高等級)云母片,透明,堅硬,色澤均勻,具有高平整性,無污漬、無外來夾雜物、裂紋和其他類似的缺陷。
圓形云母片用于碳支撐膜生產和薄膜鍍覆研究,云母還用作TEM表征樣品的基底。
適合為高分辨率的原子力顯微鏡(AFM)進行研究,如DNA,DNA-蛋白和薄膜基板。
Freshly cleaved muscovite mica surfaces have an outstanding even surface, are optically flat, clear, transparent, scratchless and free from fingerprints. They are very useful in electron microscopy for production of carbon support films, particle imaging, cell growing and thin film coating research. Muscovite mica surface are also suitable as substrates for high resolution atomic force microcopy studies such as DNA, DNA-protein and thin films.
Cleaving mica involves insertion of a sharp edge or point into an edge or corner of the sheet and gently prying apart the leaves. A good sharp razor blade edge will do the job and in some cases a sharp pointed tweezer may accomplish this.. The freshly exposed micro surface should be used immediately after cleaving to take advantage of the clean and even surface. The muscovite mica is die cut to the sizes offered. The thickness of the mica sheets varies between 0.18 - 0.25mm (0.007 - 0.01") which yields much thinner, uniform sheets.
Cleaving can also be achieved by placing a double coated piece of tape onto the mica surface and gently pulling off the mica layer starting on one edge of the mica. Then place mica with tape side down on to a specimen disc or mount. Muscovite mica cleaves on the {001} plane. Ruby muscovite color ranges from almost white through pink to a light ruby and into shades of brownish ruby and brown. It is considered of higher quality (compared to green muscovite) because of hardness and excellent cleavage properties permitting it to be split into the thinnest desired film without the risk of cracking. It is optically flat, resilient and incompressible. While it splits into thin films along its cleavage planes, it remains tough and elastic, even at high temperatures. Chemically, mica is a complex hydrous silicate of aluminum, containing potassium, magnesium, iron, sodium fluoride and/or lithium and traces of other elements. It is stable and inert to water, acids (except hydrofluoric and concentrated sulfuric acids), alkalis, conventional solvents and oil. Our mica has minimum inclusions, minimum air and bubbles and is clean. ASTM D-351 describes grading standards for mica.
Mica Grades
Mica grades from V-1 to V-5 with V-1 being the highest quality.
V-1 Clear, hard, of uniform color, nearly flat, free from stains, foreign inclusions, cracks and other similar defects.
V-2 Clear and slightly stained. May contain slight crystallographic discoloration and very slight air inclusions in one fourth of the usable area.
V-3 Fair stained. Hard, of uniform color, may contain slight waves, slight crystallographic discoloration, and medium air inclusions in not more than one half of the usable area.
V-4 Good stained. Hard, of uniform color, may contain medium waves. Slight crystallographic discoloration and medium air inclusions in not more than two thirds of the usable area.
V-5 Stained A quality. Hard, may contain medium air inclusions, uniformly distributed in the usable area, slight green vegetable stains and medium waviness.
AFM Mica Discs
Highest quality grade V1 mica, 0.21mm (0.0085”) thick. Interleaved, in packages of 10. Can be mounted on AFM/STM discs.
Available in four diameters:
10mm (0.39")
12mm (0.47")
15mm (0.59")
20mm (0.79")
美國TED PELLA原裝進口,正規渠道,有正規報關手續,必須時可以提供合法合規手續,誠信經營。高校、科研所實驗室可以先送貨,后公對公付款。
基底材料是用于SEM,AFM,X射線分析,電子探針顯微鏡等設備表征時的樣品提供各種類型的襯底。隨著各種制備手段的提高,基底材料的特性將很大程度上影響材料的生長過程?;撞牧系奶赜袑傩裕ㄈ绻?、電、磁等屬性)也會影響到樣品的表征。所以選擇正確的基底對樣品的制備過程與表征結果有重要的意義。
原裝進口 V1級(最高等級)云母片,透明,堅硬,色澤均勻,具有高平整性,無污漬、無外來夾雜物、裂紋和其他類似的缺陷。
圓形云母片用于碳支撐膜生產和薄膜鍍覆研究,云母還用作TEM表征樣品的基底。
適合為高分辨率的原子力顯微鏡(AFM)進行研究,如DNA,DNA-蛋白和薄膜基板。
Freshly cleaved muscovite mica surfaces have an outstanding even surface, are optically flat, clear, transparent, scratchless and free from fingerprints. They are very useful in electron microscopy for production of carbon support films, particle imaging, cell growing and thin film coating research. Muscovite mica surface are also suitable as substrates for high resolution atomic force microcopy studies such as DNA, DNA-protein and thin films.
Cleaving mica involves insertion of a sharp edge or point into an edge or corner of the sheet and gently prying apart the leaves. A good sharp razor blade edge will do the job and in some cases a sharp pointed tweezer may accomplish this.. The freshly exposed micro surface should be used immediately after cleaving to take advantage of the clean and even surface. The muscovite mica is die cut to the sizes offered. The thickness of the mica sheets varies between 0.18 - 0.25mm (0.007 - 0.01") which yields much thinner, uniform sheets.
Cleaving can also be achieved by placing a double coated piece of tape onto the mica surface and gently pulling off the mica layer starting on one edge of the mica. Then place mica with tape side down on to a specimen disc or mount. Muscovite mica cleaves on the {001} plane. Ruby muscovite color ranges from almost white through pink to a light ruby and into shades of brownish ruby and brown. It is considered of higher quality (compared to green muscovite) because of hardness and excellent cleavage properties permitting it to be split into the thinnest desired film without the risk of cracking. It is optically flat, resilient and incompressible. While it splits into thin films along its cleavage planes, it remains tough and elastic, even at high temperatures. Chemically, mica is a complex hydrous silicate of aluminum, containing potassium, magnesium, iron, sodium fluoride and/or lithium and traces of other elements. It is stable and inert to water, acids (except hydrofluoric and concentrated sulfuric acids), alkalis, conventional solvents and oil. Our mica has minimum inclusions, minimum air and bubbles and is clean. ASTM D-351 describes grading standards for mica.
Mica Grades
Mica grades from V-1 to V-5 with V-1 being the highest quality.
V-1 Clear, hard, of uniform color, nearly flat, free from stains, foreign inclusions, cracks and other similar defects.
V-2 Clear and slightly stained. May contain slight crystallographic discoloration and very slight air inclusions in one fourth of the usable area.
V-3 Fair stained. Hard, of uniform color, may contain slight waves, slight crystallographic discoloration, and medium air inclusions in not more than one half of the usable area.
V-4 Good stained. Hard, of uniform color, may contain medium waves. Slight crystallographic discoloration and medium air inclusions in not more than two thirds of the usable area.
V-5 Stained A quality. Hard, may contain medium air inclusions, uniformly distributed in the usable area, slight green vegetable stains and medium waviness.
AFM Mica Discs
Highest quality grade V1 mica, 0.21mm (0.0085”) thick. Interleaved, in packages of 10. Can be mounted on AFM/STM discs.
Available in four diameters:
10mm (0.39")
12mm (0.47")
15mm (0.59")
20mm (0.79")
美國TED PELLA原裝進口,正規渠道,有正規報關手續,必須時可以提供合法合規手續,誠信經營。高校、科研所實驗室可以先送貨,后公對公付款。
聯系我們
深圳微納電子科技有限公司
地址:深圳市龍崗區坂田街道榮興大廈第10層
手機:18948798140(微信同號)
QQ:3454678069
郵箱:3454678069@qq.com
網址:www.weinasz.com